Monday, June 20, 2011

Common Problem Seen at Summer Swim Clubs



Look at the picture above and (hopefully) you will notice that the diving board does not line-up correctly with the diving stand. If the fulcrum is rolled forward, it will roll off the rubber channels causing an unsafe "metal on metal" situation which is the quickest way to crack your board -- a $3,500.00 problem! This commonly seen situation occurs when a pool upgrades their diving board from a 16' Duraflex Board to a 16' Modified Maxiflex Model B "Cheeseboard." The installation "foot print" for the diving stand is dependant on what model diving board is installed upon it.


Although the two boards look similar to the untrained eye -- they are in fact very different. The Cheeseboard is tapered at BOTH ends of the board whereas the 16' Duraflex Board is tapered only at the end over the water. The Cheeseboard has about 200 perforations in the tip end of the board but the 16' Duraflex Board has none. The placement of the rubber channels on the underside of each diving board occurs at a different location because each board is designed to bend at a different spot.


The quick fix for this situation is to simply purchase a six inch set of rubber channels and attach them to the underside of your diving board in front of the existing 30" rubber channels currently installed. However, the long term (and correct) fix for this situation is to re-install the stand with the correct dimensions between the two parts (the Ladder Assembly and the Main Support). In a nutshell -- they need to be 5.5 inches closer together. This can be accomplished by moving the Main Support BACK 5.5 inches closer to the Ladder Assembly OR moving the Ladder Assembly 5.5 inches FORWARD. You can get a factory installation template as well as engineered Spec. Sheets to help you do this or you can hire a competent contractor to do the work for you.


Please note that the Duraflex Factory makes five different height 1M Diving Stands to conform to the myriad of pool deck to water levels found around the country. Before placing your order for an installation template and spec. sheet -- you will need to get the "casting number" from both your Main Support and Ladder Assembly as well as your pool deck to water level.

1 comment:

madalenajaenicke said...

Casino Bonus codes 2021 - Pro & College Gambling
This 토토 라이브 스코어 is when 힘 숨찐 챌린지 you are making a deposit bonus and it's not going to work. If you get 블랙잭전략 a Casino 실시간 배당 Bonus, the 네임드사다리 amount you are getting is a little